×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.
  • Page:
  • 1

TOPIC:

Giubileo 175 resto 6 years 11 months ago #5557

  • buellistix
  • buellistix's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 0
well I've started!! everything seems so far to be as it should be & nothing missing with the exception of the chainguard ,still haven't managed to unsieze it & having removed the rocker cover the inlet valves fully open, so at the bottom of the stroke which probably isn't making things any easier, but all looks good so far, & touch wood no nasty surprises, I'll post some pics soon as I get a chance

Re: Giubileo 175 resto 6 years 11 months ago #5558

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
Aye, fingers crossed - the deeper you delve the more surprises there may be, or if you're lucky it'll all come apart without drama. If in doubt soak the living daylights out of every nut and bolt in PlusGas just in case.

Re: Giubileo 175 resto 6 years 10 months ago #5580

  • buellistix
  • buellistix's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 0
Just a little update,...Finally unsiezed, & after a little scotchbright scrub, it's running a 61.2 piston, so been bored a few times in it's life, but then the speedo does read 30K's, the exhaust valves pocketed a little bit & there's some wear on the tappets, but nothing major, just got to draw the dynamo off now & the cases can come apart

Re: Giubileo 175 resto 6 years 10 months ago #5582

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
Good news, still keeping the fingers crossed the rest of it is just as trouble free.
  • Page:
  • 1
Time to create page: 0.024 seconds
Powered by Kunena Forum