×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.
  • Page:
  • 1

TOPIC:

Crono vs. GFR 'power vlave' 10 years 5 months ago #2838

  • Joachim
  • Joachim's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
Hi

is there anybody out there who owns a Crono?
For another member of the german forum we are searching a solenoid and a black box for the 'power valve' of his Crono.

It would be a big help if someone can proof that those aprts are the same as on the GFR.
I would need the numbers on the sticker of the solenoid and the numbers on the black box.

Thanks a lot, Joachim

Re: Crono vs. GFR 'power vlave' 10 years 4 months ago #2887

  • Valdeziscoming
  • Valdeziscoming's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 99
  • Thank you received: 0
Hi Joachim,

My GFR and Crono parts catalogues show the same Gilera part number for both the solenoid and control box so they should be the same for both models.

And so they should be as the box is counting pules, when it sees the correct number it puts an earth on the solenoid and we have lift off.

Leigh

Re: Crono vs. GFR 'power vlave' 10 years 4 months ago #2888

  • Joachim
  • Joachim's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
Thanks a lot.
Soemtimes live could be so easy if i only had a look at the manual

;) Joachim
  • Page:
  • 1
Time to create page: 0.022 seconds
Powered by Kunena Forum