×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.

TOPIC:

Re: RC front master cylinder 11 years 2 months ago #1407

  • Valdeziscoming
  • Valdeziscoming's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 99
  • Thank you received: 0
John,
Yes! Sorry for the finger problems :ohmy: , the part number on the bag IS 45530-NN3-305.

Order now !!!!

Leigh

Re: RC front master cylinder 11 years 2 months ago #1408

  • Kano Nordi
  • Kano Nordi's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
I have the same problem, I put it down to advancing age etc.
Thanks
John

Re: RC front master cylinder 11 years 2 months ago #1411

  • Kano Nordi
  • Kano Nordi's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi Leigh,
Just to let you know I ordered, nothing on the website to say it is 11mm diameter, the juju man will come to get you if it's a wrong size.
John

Re: RC front master cylinder 11 years 2 months ago #1413

  • Valdeziscoming
  • Valdeziscoming's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 99
  • Thank you received: 0
John,

I know there's nothing to say it's 11mm, I admit I took a gamble when I bought it!!!!

From studying the picture on the Jim Sandiford website I calculated that it was going to be between 11 and 12mm!!! Both 11 and 11.5 would have been good (Crono uses 11.5mm piston), as it turned out it's 11mm and I fixed my Apache, finding a fix for the Crono will be harder but I'll keep at it.

I'm not frightened by the Juju man, I think he's already here judging by the problems I'm finding on my Crono :huh:

Leigh

Re: RC front master cylinder 11 years 2 months ago #1416

  • Kano Nordi
  • Kano Nordi's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi Leigh,
A gambling man ;) I was looking on a site for a company called trials and tribulations selling parts for Beta, Sherco and other trials bikes, they had master cylinder kits for Grimeca and AJP brakes, maybe something there to take a gamble on :)
If you already have the juju man I did not send him, yet :laugh:
John

Re: RC front master cylinder 11 years 2 months ago #1427

  • Valdeziscoming
  • Valdeziscoming's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 99
  • Thank you received: 0
Hi John,

I've had a look at the Trials and tribulations site but there's not enough info there to tempt me into another punt! No pictures of a piston, on the Sandiford site there was a clear picture of the piston and seals so the only doubt was the size.

Better keep your Juju man there! If he turns up here I'll get really nasty and send my kids over to you:woohoo:

Leigh
Time to create page: 0.028 seconds
Powered by Kunena Forum